Polytunnel Package (Fully Installed)

Description

Our Polytunnels come fully fitted by our in-house Professional fitters. 

Our fully installed Polytunnel's come supplied with the following:

• Hoops: 35ø x 2mm wall high tensile galvanized steel tube specifically made for polytunnel construction with 3ft straight sides.


• Ground bars: 35ø x 700mm long tube sitting 600mm into the ground to provide foundation support for each leg of your tunnel hoops.


• 4 x Storm support bars: 2 attached to each gable end providing maximum support against harsh weather conditions.


• Anti-hot spot tape


• Base Rail System: Pressure treated 4″x 2″ timber base rail system for attaching the polythene to your tunnel.


• Front single door: You can also add a rear door or upgrade a single door to a double door. See the Optional Extras below.


• Rear air vent panel: 1mm apperture, UV treated windbreak mesh to maximise air ventillation in your tunnel.


• Polythene: 800 Gauge diffused anti-drip and anti-fog thermostatic polythene cover. Comes with 7 year UV breakdown Warrenty.


• Concrete: Concrete is provided to support door frames and ground bars subject to Polytunnel length.

Optional Extras

• Doors: You can also add a rear door or upgrade a single door to a double door.


• Raised Beds: 9 x 2-inch pressure treated timber beds suitable to grawoing plants or vegatables. Available in 9 or 18-Inch options.

No trench required when fitting your polytunnel with the base rail system.

Note: Please take the time to read the Important Information tab above regarding your site before purchasing a tunnel.

---

 

When choosing your fully fitted Polycarbonate Greenhouse or Polytunnel it is essential that the site must be as flat and level as possible.





If the ground is not flat and level as required, a refitting charge will be applicable or the kit will be left for self assembly.





Before you start any groundworks, please contact us to establish that your site is suitable for a Polytunnel or Polycarbonate Installation.





If you are unsure please contact us or call 087 366 8692 for advice before you place your order.

Choosing your Site

The best site for your polytunnel is a green field or lawn. Your site should also be as flat as possible and should also not be ploughed or contain broken ground in any way as the Ground Bars of your tunnel will need to be secured 700mm under the ground. If the ground where your tunnel will be situated does not contain undisturbed soil, it will not be enough to secure the ground bars in the ground. if the chosen site is situated on a gradual slope, the tunnel should be positioned running in line with slope. 

On construction of the tunnel, our fitters will need a clear site free from any Bushes, obstacles and animal feces. Our fitters will also need a 1 metre gap around the entire perimeter of the tunnel location in order to safely use hand tools and secure the ploythene.

Access to the site should also be a short distance from where our company vans will be parked as there will be a lot of heavy and awkward to carry materials brought on the day of fitting. Our fitters will also need acess to a water supply on the day of fitting.

Please also be aware that your tunnel cannot be situated above an area where there are underground services e.g. Water pipes, Power cables and gas pipes as this is huge safety risk to both yourself and our fitters.

If you have any questions to any of the above, please feel free to call us 087 3668692.