Greenhouse DROP 20 (Fully Installed)

From: €1,500

Size – The width of the greenhouse is 3 metres, the height is 2.4 metres including timber base, the length is 4, 6, 8, 10 and 12 metres, multiples of 2 metres.

Frame – Galvanized outside and inside a square pipe 20 x 20, the distance between the arcs is 65 cm (an increased number of arches).

All fitted by our own in-house professional fitters.

IMPORTANT:

When choosing your Polycarbonate Greenhouse it is essential that the site must be as flat and level as possible.

If you are unsure please contact us for advice before you place your order.

This is to ensure the correct installation of your polycarbonate greenhouse.

If the ground is not flat and level as required, a refitting charge will be applicable or the kit will be left for self assembly.

Your Polycarbonate Greenhouse cannot be fitted on a sloped site. If you are in any way unsure please call us on 087 366 8692.

NOTE:

When choosing your Polycarbonate Greenhouse it is essential that the site must be as flat and level as possible.

If you are unsure please contact us for advice before you place your order.

This is to ensure the correct installation of your polycarbonate greenhouse.

If the ground is not flat and level as required, a refitting charge will be applicable or the kit will be left for self assembly.

Your Polycarbonate Greenhouse cannot be fitted on a sloped site. If you are in any way unsure please call us on 087 366 8692.

Before you start any groundworks, please contact us to establish that your site is suitable for a Polytunnel or Polycarbonate Installation.

Compare
Clear
  • Optional Extras

  • All side raised beds are 900mm wide by the required length of your tunnel with set divides in place all made from 9″x 2″ treated timber.

    Center raised beds vary in width to maximise the width of your tunnel allowing for 2 foot pathways on each side. They are also shorter (2mtrs in the front and 1mtr at the back of the tunnel) to allow access to the back and in the front to allow you in with supplies.

    • 1 is for one side (left OR right)
    • 2 for two sides (left AND right)
    • 3 for three sides (left, right & center)

    Please tick the height of raised bed required and then enter the number of sides in the input field beside.

    All side raised beds are 900mm wide by the required length of your tunnel with set divides in place all made from 9″x 2″ treated timber.

    Center raised beds vary in width to maximise the width of your tunnel allowing for 2 foot pathways on each side. They are also 2 meters shorter in the front and 1 meter at the back of the tunnel to allow you in with supplies.

    • 1 is for one side (left OR right)
    • 2 for two sides (left AND right)
    • 3 for left, right & center

    Raised beds in our polytunnel

    Please tick the required length of raised bed matching the length of your chosen greenhouse and then enter the number of sides in the input field beside.

    • 80 €
    • 160 €
    • 200 €
    • 260 €
    • 320 €
    • 380 €
    • 160 €
    • 320 €
    • 400 €
    • 520 €
    • 640 €
    • 760 €
    • A ventilating window’s reliable structure with an automated opening device shall stand high wind loads.
    • A ventilating window will open and close automatically when the environmental temperature changes.
    • Does not require manual intervention. You simply install a ventilating window in the greenhouse and set the automated opening device.
    • 150 €
    Reset options

Description

Dimensions:

Greenhouse width of 3 metres, height of 2.4 metres including timber base, length of 4, 6, 8, 10 and 12 metres, in multiples of 2 metres.

Frame:

The frame is made of a galvanized square pipe 20 x 20, the distance between arches is 0.65m. The frame is fastened with 7 longitudinal guides, which prevent polycarbonate failure under the weight of the snow cap and impart additional stability to the frame.

Standard set of a greenhouse has:

2 doors and 2 ventilating windows at opposite ends of the greenhouse.

Polycarbonate:

Standard polycarbonate sheet is 6 metres long, 2.1 metre wide and 4mm thick. It has a layer of UV protection on the top.

Polycarbonate fastening:

double reinforced fastening: roofing self-tapping screws with a rubber press washer through the galvanized tape. Thanks to such fasteners, accidental pushing of polycarbonate during installation is excluded. Such fastening of polycarbonate helps to avoid the breakdown of polycarbonate by a sharp gusty wind.

Thanks to a frame with a zinc coating class of 140-180 microns, the greenhouse is extremely resistant to rust and does not require tint or paint during operation (unlike greenhouses painted with DTM). The sharp form (drop shape) of the greenhouse prevents the accumulation of a snow cap.

Automated Ventilating Windows

A ventilating window will open and close automatically when the environmental temperature changes. When fitting an Automated Ventilating Window to a Polycarbonate Greenhouse, the window is inserted into the polycarbonate sheeting, thus it cannot be sealed. Occasional leaking will occur and condensation between the polycarbonate sheeting is normal.

Installation:

Large assembly units ensure ease of the greenhouse installation. That’s why 95% of our purchasers install it by themselves.
The greenhouse must be installed on a foundation. We recommend wooden bar 100 x 150mm.

How to install your automatic window for DROP greenhouse by yourself

Additional information

Width

3 metres

Length

4 metres, 6 metres, 8 metres, 10 metres, 12 metres