Greenhouse FARMER DROP 5 (Fully Installed)
From: €4,300
This greenhouse is 5 metres wide. You may choose any length (the greenhouse length can be increased in 2-metre increments, for example, to 6, 8, 10 or 12 metres or more).
Frame – Galvanized outside and inside a square pipe 25 x 25mm, the distance between the arcs is 65 cm (an increased number of arches).
Automated Ventilating Windows
A ventilating window will open and close automatically when the environmental temperature changes. When fitting an Automated Ventilating Window to a Polycarbonate Greenhouse, the window is inserted into the polycarbonate sheeting, thus it cannot be sealed. Occasional leaking will occur and condensation between the polycarbonate sheeting is normal.
IMPORTANT:
When choosing your Polycarbonate Greenhouse it is essential that the site must be as flat and level as possible.
If you are unsure please contact us for advice before you place your order.
This is to ensure the correct installation of your polycarbonate greenhouse.
If the ground is not flat and level as required, a refitting charge will be applicable or the kit will be left for self assembly.
Your Polycarbonate Greenhouse cannot be fitted on a sloped site. If you are in any way unsure please call us on 087 366 8692.
Before you start any groundworks, please contact us to establish that your site is suitable for a Polytunnel or Polycarbonate Installation.
Description
Frame:
The frame is made of a galvanized square pipe 25 x 25, the distance between arches is 0.65m. The frame is fastened with 7 longitudinal guides, which prevent polycarbonate failure under the weight of the snow cap, and impart additional stability to the frame.
Standard set of a greenhouse has:
2 doors and 2 ventilating windows at opposite ends of the greenhouse.
Polycarbonate:
Standard polycarbonate sheet is 6m long, 2.1m wide and 4mm thick. It has a layer of UV protection on the top.
Automated Ventilating Windows
A ventilating window will open and close automatically when the environmental temperature changes. When fitting an Automated Ventilating Window to a Polycarbonate Greenhouse, the window is inserted into the polycarbonate sheeting, thus it cannot be sealed. Occasional leaking will occur and condensation between the polycarbonate sheeting is normal.
Polycarbonate fastening:
Double reinforced fastening: roofing self-tapping screws with a rubber press washer through the galvanized tape. Thanks to such fasteners, accidental pushing of polycarbonate during installation is excluded. Such fastening of polycarbonate helps to avoid the breakdown of polycarbonate by a sharp gusty wind.
Thanks to a frame with a zinc coating class of 140-180 microns, the greenhouse is extremely resistant to rust and does not require tint or paint during operation (unlike greenhouses painted with DTM). The sharp form (drop shape) of the greenhouse prevents the accumulation of a snow cap.
How to install your automatic window for DROP greenhouse by yourself
Additional information
| Width | 5 metres |
|---|---|
| Length | 6 metres, 8 metres, 10 metres, 12 metres |
Related products
-
D.I.Y Greenhouse RUBY 2.5 Kit (Supply Only)
The Ruby 2.5 greenhouse is 2.5 meters wide. Basic length is 4 metres (greenhouse’s length may be increased by any 2-meter increment, for instance, 4, 6, 8, 10 and 12 metres). The space between the arcs is 0.65 metres. Frame - The greenhouse’s structure is made of a square pipe being 20 x 20mm galvanized. Base - The greenhouse must be installed on a foundation. We recommend pressure treated timber 150 x 100mm or foundation piles which will increase the overall height of your tunnel by 150mm. PLEASE BE AWARE THAT THE D.I.Y. KIT DOES NOT INCLUDE FOUNDATION TIMBER OR PILES. See RUBY 2.5 with Full Installation which includes timber foundation »From: €1,175 Select options -
D.I.Y Greenhouse DROP 20 Kit (Supply Only)
Size - The width of the greenhouse is 3 metres, the height is 2.4 metres including timber base, the length is 4, 6, 8, 10 and 12 metres, multiples of 2 metres. Frame - Galvanized outside and inside a square pipe 20 x 20, the distance between the arcs is 65 cm (an increased number of arches). Base - The greenhouse must be installed on a foundation. We recommend pressure treated timber 150 x 100mm or foundation piles which will increase the overall height of your tunnel by 150mm. PLEASE BE AWARE THAT THE D.I.Y. KIT DOES NOT INCLUDE FOUNDATION TIMBER OR PILES. See DROP 20 with Full Installation which includes timber foundation »From: €900 Select options -
Greenhouse DROP 2 (Fully Installed)
Size - The width of the greenhouse is 2 metres, the height of the greenhouse is 2.2 metres, the length of the greenhouse is 2, 4 and 6 metres. The frame is a square galvanized pipe 20 x 20, the distance between the arcs is 1 metre. All fitted by our own in-house professional fitters. IMPORTANT: When choosing your Polycarbonate Greenhouse it is essential that the site must be as flat and level as possible. If you are unsure please contact us for advice before you place your order. This is to ensure the correct installation of your polycarbonate greenhouse. If the ground is not flat and level as required, a refitting charge will be applicable or the kit will be left for self assembly. Your Polycarbonate Greenhouse cannot be fitted on a sloped site. If you are in any way unsure please call us on 087 366 8692.From: €1,075 Select options -
Greenhouse FARMER DROP 4 (Fully Installed)
Size - The width of the greenhouse is 4 metres, the height of the greenhouse is 2.2 metres, the length of the greenhouse is 4, 6, 8, 10 and 12 metres. The frame is a square galvanized pipe 25 x 25, the distance between the arcs is 1 metre. All fitted by our own in-house professional fitters. IMPORTANT: When choosing your Polycarbonate Greenhouse it is essential that the site must be as flat and level as possible. If you are unsure please contact us for advice before you place your order. This is to ensure the correct installation of your polycarbonate greenhouse. If the ground is not flat and level as required, a refitting charge will be applicable or the kit will be left for self assembly. Your Polycarbonate Greenhouse cannot be fitted on a sloped site. If you are in any way unsure please call us on 087 366 8692.From: €2,250 Select options
