new

D.I.Y. Greenhouse FARMER 7.5 Kit (Supply Only)

From: €5,400

This greenhouse is 7.5 metres wide and with lengths of: 8, 10, 14 and 16 metres.

Frame – Galvanized outside and inside a square pipe 25 x 25 mm with a base pipes of 60x40mm

Base – The greenhouse must be installed on a foundation. We recommend pressure treated timber 175 x 75mm or foundation piles which will increase the overall height of your tunnel by 175mm.

Compare
Clear
  • Optional Extras

  • We use environmentally-friendly material only

    Foundation timber

    • 180 €
    • 200 €
    • 260 €
    • 300 €
    • 340 €

    Galvanized foundation piles are made of durable material, not apt to corrosion. They reliably fix the greenhouse to the soil and completely prevent its shifting tendency. They are quite handy during transportation.

    foundation piles

    • 110 €
    • 140 €
    • 170 €
    • 200 €
    • 230 €
  • All side raised beds are 900mm wide by the required length of your tunnel with set divides in place all made from 9″x 2″ treated timber.

    Center raised beds vary in width to maximise the width of your tunnel allowing for 2 foot pathways on each side. They are also shorter (2mtrs in the front and 1mtr at the back of the tunnel) to allow access to the back and in the front to allow you in with supplies.

    All side raised beds are 900mm wide by the required length of your tunnel with set divides in place all made from 9″x 2″ treated timber. Please note: Raised beds are shipped as a kit for self assembly.

    Center raised beds vary in width to maximise the width of your tunnel allowing for 2 foot pathways on each side. They are also 2 meters shorter in the front and 1 meter at the back of the tunnel to allow you in with supplies.

    • 1 is for one side (left OR right)
    • 2 for two sides (left AND right)
    • 3 for left, right & center
    Raised beds in our polytunnel

    Please tick the required length of raised bed matching the length of your chosen greenhouse and then enter the number of sides in the input field beside.

    • 80 €
    • 160 €
    • 200 €
    • 260 €
    • 320 €
    • 380 €
    • 180 €
    • 320 €
    • 400 €
    • 520 €
    • 640 €
    • 760 €
    • A ventilating window’s reliable structure with an automated opening device shall stand high wind loads.
    • A ventilating window will open and close automatically when the environmental temperature changes.
    • Does not require manual intervention. You simply install a ventilating window in the greenhouse and set the automated opening device.
    • 150 €
    Reset options
SKU: N/A Category:

Description

Standard set of a greenhouse has:

  • Large-Section Frame Assembly
  • 2 greenhouse doors and 2 gates face each other
  • Polycarbonate double fixing by roofing self-tapping screws + galvanized band
  • UV-Resistant Polycarbonate

Frame:

The frame is made of a galvanized square pipe 25 x 25mm, the distance between arches is 0.65m. The frame is fastened with 7 longitudinal guides, which prevent polycarbonate failure under the weight of the snow cap, and impart additional stability to the frame.

Polycarbonate:

Standard polycarbonate sheet is 6m long, 2.1m wide and 4mm thick. It has a layer of UV protection on the top.

Polycarbonate fastening:

Double reinforced fastening: roofing self-tapping screws with a rubber press washer through the galvanized tape. Thanks to such fasteners, accidental pushing of polycarbonate during installation is excluded. Such fastening of polycarbonate helps to avoid the breakdown of polycarbonate by a sharp gusty wind.

Thanks to a frame with a zinc coating class of 140-180 microns, the greenhouse is extremely resistant to rust and does not require tint or paint during operation (unlike greenhouses painted with DTM). The sharp form (drop shape) of the greenhouse prevents the accumulation of a snow cap.

Automated Ventilating Windows

A ventilating window will open and close automatically when the environmental temperature changes. When fitting an Automated Ventilating Window to a Polycarbonate Greenhouse, the window is inserted into the polycarbonate sheeting, thus it cannot be sealed. Occasional leaking will occur and condensation between the polycarbonate sheeting is normal.

Installation recommendations
The greenhouse must be installed on a foundation. We recommend pressure treated timber 175x 75mm or foundation piles which will increase the overall height of your tunnel by 175mm.

How to install the FARMER DROP greenhouse by yourself
For assembly details see example of RUBY installation.

How to install your automatic window for DROP greenhouse by yourself

Additional information

Width

7.5 metres

Length

8 metres, 10 metres, 14 metres, 16 metres