new

D.I.Y. Greenhouse FARMER DROP 4 Kit (Supply Only)

From: €1,550

This greenhouse is 4 metres wide. You may choose any length (the greenhouse length can be increased in 2-metre increments, for example, to 6, 8, 10, 12 metres or more).

Frame – Galvanized outside and inside a square pipe 25 x 25 mm, the distance between the arcs is 65 cm (an increased number of arches).

Base – The greenhouse must be installed on a foundation. We recommend pressure treated timber 175 x 75mm or foundation piles which will increase the overall height of your tunnel by 175mm.

PLEASE BE AWARE THAT THE D.I.Y. KIT DOES NOT INCLUDE FOUNDATION TIMBER OR PILES. See FARMER DROP 4 with Full Installation which includes timber foundation »

Compare
Clear
  • Optional Extras

  • We use environmentally-friendly material only

    Foundation timber

    • 180 €
    • 200 €
    • 260 €
    • 300 €
    • 340 €

    Galvanized foundation piles are made of durable material, not apt to corrosion. They reliably fix the greenhouse to the soil and completely prevent its shifting tendency. They are quite handy during transportation.

    foundation piles

    • 110 €
    • 140 €
    • 170 €
    • 200 €
    • 230 €
  • All side raised beds are 900mm wide by the required length of your tunnel with set divides in place all made from 9″x 2″ treated timber.

    Center raised beds vary in width to maximise the width of your tunnel allowing for 2 foot pathways on each side. They are also shorter (2mtrs in the front and 1mtr at the back of the tunnel) to allow access to the back and in the front to allow you in with supplies.

    All side raised beds are 900mm wide by the required length of your tunnel with set divides in place all made from 9″x 2″ treated timber. Please note: Raised beds are shipped as a kit for self assembly.

    Center raised beds vary in width to maximise the width of your tunnel allowing for 2 foot pathways on each side. They are also 2 meters shorter in the front and 1 meter at the back of the tunnel to allow you in with supplies.

    • 1 is for one side (left OR right)
    • 2 for two sides (left AND right)
    • 3 for left, right & center
    Raised beds in our polytunnel

    Please tick the required length of raised bed matching the length of your chosen greenhouse and then enter the number of sides in the input field beside.

    • 80 €
    • 160 €
    • 200 €
    • 260 €
    • 320 €
    • 380 €
    • 180 €
    • 320 €
    • 400 €
    • 520 €
    • 640 €
    • 760 €
    Reset options
SKU: N/A Category:

Description

Standard set of a greenhouse has:

  • Large-Section Frame Assembly
  • 2 greenhouse doors and 2 gates face each other
  • Polycarbonate double fixing by roofing self-tapping screws + galvanized band
  • UV-Resistant Polycarbonate

Frame:

The frame is made of a galvanized square pipe 25 x 25mm, the distance between arches is 0.65m. The frame is fastened with 7 longitudinal guides, which prevent polycarbonate failure under the weight of the snow cap, and impart additional stability to the frame.

Polycarbonate:

Standard polycarbonate sheet is 6m long, 2.1m wide and 4mm thick. It has a layer of UV protection on the top.

Polycarbonate fastening:

Double reinforced fastening: roofing self-tapping screws with a rubber press washer through the galvanized tape. Thanks to such fasteners, accidental pushing of polycarbonate during installation is excluded. Such fastening of polycarbonate helps to avoid the breakdown of polycarbonate by a sharp gusty wind.

Thanks to a frame with a zinc coating class of 140-180 microns, the greenhouse is extremely resistant to rust and does not require tint or paint during operation (unlike greenhouses painted with DTM). The sharp form (drop shape) of the greenhouse prevents the accumulation of a snow cap.

Installation recommendations
The greenhouse must be installed on a foundation. We recommend pressure treated timber 175x 75mm or foundation piles which will increase the overall height of your tunnel by 175mm.

How to install the FARMER DROP greenhouse by yourself
For assembly details see example of RUBY installation.

How to install your automatic window for DROP greenhouse by yourself

Additional information

Width

4 metres

Length

4 metres, 6 metres, 8 metres, 10 metres, 12 metres

Download Assembly Instruction ManualDownload Assembly Instruction Manual 2

Reviews

There are no reviews yet.

Be the first to review “D.I.Y. Greenhouse FARMER DROP 4 Kit (Supply Only)”

Your email address will not be published. Required fields are marked *